I shall highly appreciate if some one can have a look at this header
and let me know what I am doing wrong I was trying to setup Smartlist
to except submission only from entries in accept file so subscribers cannot
post or submit to newletter, after config as per manual I get message
X-Diagnostic: Not on the accept list, I have setup RC s00, s01 and s02
accept file contain emails of people permited to submit
rc.custom and rc.init are configer as follows
maxhist = 32 # bounce history limit
minbounce = 4 # no. of bounces before removal
cutoff_bounce = 256 # lines to keep in bounce processing
match_threshold= 30730 # for close matches to the list
#medium_threshold= 28672 # for not so close matches to the list
#loose_threshold= 24476 # for loosely finding your name
#auto_off_threshold= $medium_threshold # for auto-unsubscribing bouncers
#off_threshold = $loose_threshold # for unsubscribing
#reject_threshold= $match_threshold # for rejecting subscriptions
#submit_threshold= $medium_threshold # for permitting submissions
#unsub_assist
##unsub_assist = 8 # uncomment (and change perhaps) this
#foreign_submit = yes
foreign_submit # uncomment this line if you
X-POP3-Rcpt: user(a)name.net
Received: (from owner@localhost)
by host.hosting.com (8.10.2/8.10.2) id f7TAPLE30544
for user(a)name.net; Wed, 29 Aug 2001 06:25:21 -0400
Date: Wed, 29 Aug 2001 06:25:21 -0400
X-Authentication-Warning: host.hosting.com: owner set sender to testlist-request(a)name.net using -f
X-From_: max(a)dalvis.net Wed Aug 29 06:25:19 2001
Received: from 213.94.227.119 (localhost [127.0.0.1])
by host.hosting.com (8.10.2/8.10.2) with ESMTP id f7TAPId30519
for <testlist(a)name.net>; Wed, 29 Aug 2001 06:25:19 -0400
To: testlist(a)name.net
From: User <user(a)name.net>
Subject: message 25
Reply-To: user(a)name.net
Old-Date: Wed, 29 Aug 2001 15:54:46 -0700
X-Sender: user(a)name.net
X-Originating-Host: 213.94.227.119 [213.94.227.119]; Wed, 29 Aug 2001 10:25:18 GMT
X-Mailer: WebMail Check v2.3.21 (2000-7-19)
X-Browser: Mozilla/4.0 (compatible; MSIE 5.5; Windows 98; ITP), JavaScript: On
Message-ID: <EmEsSaGe.iD.97328071035522(a)www.name.net>
MIME-Version: 1.0
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: 8bit
X-Diagnostic: Not on the accept list
X-Envelope-To: testlist
Thanking you with best regards.
Tariq Dalvi
Hi,
Can any of you seasoned listadmins direct me to someplace
on the 'Net that deals withh copyright, intellectual property, and
reserved rights issues that may arise from the hosting and adminsitration
of email mailing lists.
Thanks,
--Paul T.
-----Original Message-----
From: Nishikant Kapoor [SMTP:nkapoor@c3ipros.com]
Sent: Sunday, August 26, 2001 3:10 PM
To: multiple recipients of
Subject: FYI: Visiting faculty
Does anyone know why the mailing-list name is missing from 'To:' field in
all my posts ?
Thanks
Nishi
Does anyone know how/if SmartList can be modified so that the
'Received:' headers from the original mail sent to a list are kept
intact and included in the messages sent to all the list members.
Thanks
Tony
Hi
I have the SmartList-3.13-1.i386.rpm from
http://rpmfind.net/linux/RPM/contrib/libc6/i386/SmartList-3.13-1.i386.html.
I am trying to run it under RedHat 7.0 on a relatively old box
(unfortunately too small for building the 3.15 version which I see is out
there in src form).
After the initial install and fixups (smrsh etc), I successfully can send a
mail to my-list-request AND get a good response back, saying "you were
subscribed". However, when I look at the dist file, it does not have any
email addresses in it. Upon inspection of the log file, it says that it
can't find multigram, which in fact is true, its not part of the rpm, nor
part of my RedHat 7 installation anywhere.
So I really have two questions:
1. Is there a mulitigram binary from the 3.13 version that I can get my
hands on?
OR
2. Is there a binary rpm for the 3.15 version that I should be using
instead?
I've tried my best to solve this without bugging you folks, but am really
stumped now.
Thanks!
Rob
mailto:rob@gumnut.bc.ca
Hello,
I'm using Smartlist 3.15 with sendmail 8.12.0 (all debian packages).
I've moved some list from a system with sendmail 8.9.3 and now for every
submission to the list I get the following error:
----- The following addresses had permanent fatal errors -----
"|/var/list/.bin/flist listname-request"
(reason: Cannot open input)
(expanded from: <listname-request(a)mydomain.it>)
----- Transcript of session follows -----
flist: Can't find ".etc" in "/usr/sbin"
550 5.3.0 "|/var/list/.bin/flist listname-request"... Cannot open input
---
I didn't found any suggestions around the Net about this problem.
I've also tryed with a freshly created new list and the problem is the same.
Is this a Sendmail issue or a Smartlist issue?
I've also tryed to use the feature smrsh of sendmail, putting flist in
/usr/lib/sm.bin/ as described in the FAQ but the errors remains the same.
Any clue?
TIA.
Regards,
luca
Hmm...
I checked, and while procmail is on Freshmeat, smartlist isn't. Might be
a good idea...?
Comments?
-ph
---------- Forwarded message ----------
Date: Thu, 23 Aug 2001 03:06:09 +0200
From: Floris Lambrechts <f.lambrechts(a)softhome.net>
Reply-To: floris.lambrechts(a)linuxfocus.org
To: sl-faq(a)hartzler.net
Subject: Freshmeat.net
He, your software looks good.
Too bad you people aren't listed at http://freshmeat.net
Why not?
You could attract a lot of users /developers that way!
regards
flo
--
floris.lambrechts(a)linuxfocus.org
Hey guys,
I posted before about the CGI script I'm rewriting for smartlist
(originally written for majordomo). The script has to send seperate emails
for each list a user wants to subscribe to using sendmail. If a user
wanted to subscribe to five lists using our web form, would it work if the
script requested one email with this header?
To: webmaster(a)mycompany.com
From: user(a)theircompany.com
Cc: list1-request(a)mycompany.com,
list2-request(a)mycompany.com,
list3-request(a)mycompany.com,
list4-request(a)mycompany.com,
list5-request(a)mycompany.com
Subject: subscribe (this could be in the body)
Or would even a Bcc work? The bottom line is that I want the script to
send only one email request to sendmail when subscribing a user to
multiple lists. Otherwise, I'd have to put the sendmail code in a
foreach loop (Perl), which I don't want to do. Any help would be much
appreciated.
.tony
Hi all,
I just switched from a moderated 'majordomo' list and having following
problems. Would really appreciate some response.
- In majordomo, I could take the original post that came to me for approval,
add my 'Approved: pwd' in first line of body and send it back to
mailing-list and it would show up as if it was posted by the original
sender, keeping the "Return-To: email', Date, etc. intact. Is there a
similar feature in 'smartlist' ?
Currently, I am 'forwarding' all the users' posts to the mailing-list with
'Approved: pwd' as the first line in body but in the process, I am losing
all the details of the original post. Also, forwarding the post after
approval puts the quotes in every line. I have a feeling that there should
be a better way of achieving this functionality in smartlist but not sure
how.
- If a user is already subscribed and tries to subscribe again, is it
possible to send him the following message back:
***** subscribe
>>>>> You are already subscribed!
Currently, user does not get any email/notification back but the moderator
gets a copy of the subscriber's email.
Could someone please suggest me some 'recipe' for this or point me in the
direction were I can get one for these problems.
Thanks
Nishi
Hi all,
I have tried the doc/manual and the archives and yes, I did find a good
deal of reference to this functionality but somehow, I am not able to
get it to work.
I have created a moderated list by turning 'moderated_flag= yes' in
rc.custom but I am having problem submitting the approved post. As the
designated moderator, I get the email with the original post but all my
subsequent submissions tagged with 'Approved: my_email_id pwd' are
coming back to me as it is. I have tried following but without any luck
(all without quotes):
'Approved: my_email pwd' in subject
'Approved: my_email pwd' in body, as first line
'Approved: my_email' in subject
'Approved: my_email' in body, as first line
Could someone please help me.
Thanks
Nishi