Hallo Frank.
Wenn ich mich recht erinnere, hat die Slot-Nummer nichts mit
dem PCI-Slot zu tun. Unter Netware wird der Treiber fuer gleiche
Karten mehrfach geladen (zumindest ist das bei Netzwerkkarten unter
4.11 so ;-) ), und die Slot-Nummer dient der Unterscheidung, welche
der baugleichen Karten man ansprechen moechte.
Mir half damals einfach die Eingabe einer "1" und einer "2"
um weiter zu kommen fuer zwei gleiche NICs. Beim Aufruf des Treibers
half dann der Parameter SLOT=1, um ohne haendische Eingabe zu
starten.
Bis dann,
Michael
------------------------------------------------------------------
Michael Heyers, Institut fuer Bergwerks- und Huettenmaschinenkunde
Wuellnerstrasse 2 E-Mail : HEYERS(a)IBH.RWTH-AACHEN.DE
52056 Aachen Tel : +49/241/80-94955
Germany Fax : +49/241/80-92227
> -----Ursprüngliche Nachricht-----
> Von: Frank Flesch [mailto:flesch@ibf.rwth-aachen.de]
> Gesendet: Dienstag, 28. Januar 2003 13:46
> An: Netware Admin list
> Betreff: [rwth-netware-admin] aic7890 SCSI-Onboard-Controller
> unter Netware 4
>
>
> Hallo Kollegen,
> der Versuch einen aic7890 SCSI-Onboard-Controller (ASUS
> P2B-LS Board)unter
> Netware 4.1 einzubinden scheitert. Beim laden des entsprechenden
> .ham-Treibers werde ich aufgefordert die SlotNr. auf der
> Konsole einzugeben.
> Diese SlotNrn. beziehen sich meines Wissens nur auf die PCI-Slots. Wie
> bringe ich denn der Maschine bei auf den Onboard-Controller
> zuzugreifen?
> Waere hier fuer Tips ausgespr. dankbar.
> Gruss,
> Frank
>
> ***********************************
> Frank Flesch
> Institut fuer Bildsame Formgebung
> -Netzwerkadministration-
> Intzestr. 10
> 52056 Aachen
> Fon: 0241 8095919
> Fax: 0241 8092234
> Web: www.ibf.rwth-aachen.de
> ***********************************
>
>
> _______________________________________________
> rwth-netware-admin mailing list
> rwth-netware-admin(a)lists.RWTH-Aachen.DE
> http://MailMan.RWTH-Aachen.DE/mailman/listinfo/rwth-netware-admin
>
Hallo Kollegen,
der Versuch einen aic7890 SCSI-Onboard-Controller (ASUS P2B-LS Board)unter
Netware 4.1 einzubinden scheitert. Beim laden des entsprechenden
.ham-Treibers werde ich aufgefordert die SlotNr. auf der Konsole einzugeben.
Diese SlotNrn. beziehen sich meines Wissens nur auf die PCI-Slots. Wie
bringe ich denn der Maschine bei auf den Onboard-Controller zuzugreifen?
Waere hier fuer Tips ausgespr. dankbar.
Gruss,
Frank
***********************************
Frank Flesch
Institut fuer Bildsame Formgebung
-Netzwerkadministration-
Intzestr. 10
52056 Aachen
Fon: 0241 8095919
Fax: 0241 8092234
Web: www.ibf.rwth-aachen.de
***********************************
Hallo zusammen,
fuer diejenigen, die diese Information noch nicht bekommen haben, hier die
Einladung zu einer Novell Veranstaltung.
Vielleicht sollten Sie ueberlegen, ob ein Abo der Mailingliste rz-info-l
(http://mailman.rwth-aachen.de/mailman/listinfo/rzinfo-l) fuer sie ebenfalls
interessant sein koennte, da hierueber informationen von uns an die
Institute geschickt werden.
Viele Gruesse
Thomas Paetzold
Thema: Informationsveranstaltung zu Netware 6 und ZENworks 4
Datum: 29.01.2003 ab 14:00 Uhr
Ort: Hoersaal der Rechen- und Kommunikationszentrums der RWTH Aachen
Im Rahmen des zwischen der RWTH Aachen und der Firma NOVELL existierenden
CLA Vertrages haben sich Herr Westphal und Herr Stiehl beide von der Firma
Novell bereiterklärt, einen Vortrag mit den Schwerpunkten Netware 6 und
ZENworks 4 abzuhalten.
Agenda
Begrüßung & Vorstellung
50 Jahre Technologie
Novell heute - von File & Print zu WebServices
Netware 6 - Mehr als File & Print - Lizensierung / Preisgestaltung
ZENworks for Desktops 4
Metaverzeichnisse / Anspruch und Realität
Fragen & Antworten
Informationen sowie das Anmeldeformualr zu dieser Veranstaltung finden Sie
unter:
http://www.rz.rwth-aachen.de/computertreff/
Alle Interessenten sind hierzu herzlich eingeladen.
Mit freundlichen Gruessen
Thomas Paetzold
Hallo,
der eine oder andere hat es heute schon gemerkt:
wir haben einen neuen Timeserver in Betrieb und in diesem Zusammenhang
hat sich die IP-Adresse geändert.
Bitte in den Konfigurationen - soweit möglich - nur die Namen
timeserver.rwth-aachen.de
timeserver2.rwth-aachen.de
verwenden und möglichst keine IP-Adressen (Novell kann es wohl nicht).
Dann die Timeserver Software neu starten, wenn nötig.
Angepasst werden müssen unter Umständen auch die Firewalls.
Hierzu folgende Information:
134.130.4.17 timeserver
137.226.112.21 timeserver2 (noch)
Letzter wird seine IP-Adresse in den nächsten Tagen ändern,
dann gilt:
134.130.5.17 timeserver2
Weiterhin machen wir darauf aufmerksam, dass die häufig noch
verwendeten alten Nameserver
137.226.144.3
137.226.112.21
Ihre Lebensdauer erreicht haben und *spätestens* Ende des Monats
ausser Betrieb gehen. Die *definitiven* Nameserver sind:
134.130.4.1
134.130.5.1
Wir bitten um Umstellung aller vergessenen Systeme!
S.a.:
http://www.rz.rwth-aachen.de/kommunikation/dialup/info/internetadressen.html
Gruss, Jens Hektor
--
Jens Hektor, RWTH Aachen, Rechenzentrum, Seffenter Weg 23, 52074 Aachen
Computing Center, Aachen University, network operation & security
mailto:hektor@RZ.RWTH-Aachen.DE, Tel.: +49 241 80 29206, Raum: 2.35
Moin!
Hat jemand von euch die Software ImagePro Plus im Einsatz?!
Wir wollen ein Mikroskop beschaffen und im Angebot ist diese Software mit über 11.000,- EUR (inkl.
CoolSnap-Pro CF) veranschlagt. Gibt es hierfür vielleicht eine günstigere Schul-/Forschungs-/Lehr-
Lizenz?!
Wer hat ein solches System mit PC im Einsatz und kann über Erfahrungen berichten, bzgl. der
notwendigen Hardware-Ausstattung des PC?
Besten Dank für eure Antworten!
Norbert Keilen
****************************************************************
Norbert Keilen
Institut fuer Siedlungswasserwirtschaft der RWTH Aachen (ISA)
EDV-Abteilung
Mies-van-der-Rohe-Strasse 1
D-52074 Aachen
Germany
Phone : (++49) (0)241 / 80 239 70
FAX : (++49) (0)241 / 80 222 85
E-Mail: keilen(a)isa.rwth-aachen.de
WWW : http://www.isa.rwth-aachen.de
****************************************************************
Guten morgen,
ab heute steht bei uns die neue Version der JRB Tools (Utilities for
Managing Netware) zur Verfuegung (JRB 9.0) Diese koennen Sie kostenlos unter
folgender Adresse anfordern: www.rz.rwth-aachen.de/sw.
Weitere Informationen ueber diese Tools erhalten Sie unter:
http://www.jrbsoftware.com/
Viele Gruesse
Thomas Paetzold
Hallo!
Seit kurzem gibt der Mercury Mailserver folgende Fehlermeldung:
"
----- The following addresses had permanent fatal errors -----
<rongen(a)mercury.bth.rwth-aachen.de>
(reason: 554 5.4.6 Too many hops)
----- Transcript of session follows -----
554 5.4.6 Too many hops 28 (25 max): from <rongen(a)bth.rwth-aachen.de>
via localhost, to <rongen(a)mercury.bth.rwth-aachen.de>
"
Diese Meldung kommt zumindest, wenn ich E-Mails intern direkt über den
SMTP-Host mercury.bth.rwth-aachen.de sende. Externe Mails an
"name(a)mercury.bth.rwth-aachen.de" scheinen einfach zu verschwinden
Die "offiziellen" Mailadressen lauten "name(a)bth.rwth-aachen.de" und
werden auch korrekt zugestellt, es würde mir reichen, wenn
"name(a)mercury.bth.rwth-aachen.de" einfach nicht mehr funktionieren würde.
Bis vor kurzem haben wir als MUA pmail mit NDS-Integration eingesetzt,
sind aber seit ein paar Wochen auf eine 2000-Domäne umgestiegen, seit
dieser Zeit rufen die pmail Mailclient ihre Mails über pop3 an.
Weiss vielleicht jemand, wo der Fehler liegen könnte?
Mit freundlichen Gruessen,
Michael Rongen,
ADV Abteilung
Hochschulbibliothek der RWTH Aachen
mailto:rongen@bth.rwth-aachen.de
Thema: MoPS, VPN und Co. Möglichkeiten für mobile Nutzer der RWTH Aachen
Datum: 27.11.2002 ab 14:00 Uhr
Ort: Hoersaal der Rechen- und Kommunikationszentrums der RWTH Aachen
Der Vortrag informiert über das WirelessLAN-Projekt der Hochschule und des
aktuellen Ausbaustandes. Ferner wird erläutert auf welche Probleme
Administratoren beim Aufbau eines WLANs stossen oder inwieweit Institute am
MoPS-Projekt teilhaben können. Weiterhin wird die Sicherheit von WLANs
beleuchtet, welche stark und zu Recht in die Kritik der Medien geraten ist.
In diesem Zusammenhang werden auch die Zugangsmechanismen, VPN und
Gastzugang, zum MoPS-Netz erklärt.
Informationen sowie das Anmeldeformualr zu dieser Veranstaltung finden Sie
unter:
http://www.rz.rwth-aachen.de/computertreff/
Alle Interessenten sind hierzu herzlich eingeladen.
Mit freundlichen Gruessen
Thomas Paetzold
please reply to hdgbyi(a)public.guangzhou.gd.cn
or bdpgong(a)hotmail.com,
thank you.
UNCERTAINTY PRINCIPLE
IS
UNTENABLE
By reanalysing the experiment of Heisenberg Gamma-Ray Microscope and one of ideal experiment from which uncertainty principle is derived , it is found that actually uncertainty principle can not be obtained from these two ideal experiments . And it is found that uncertainty principle is untenable.
Key words :
uncertainty principle; experiment of Heisenberg Gamma-Ray Microscope; ideal experiment
Ideal Experiment 1
Experiment of Heisenberg Gamma-Ray Microscope
A free electron sits directly beneath the center of the microscope's lens (see the picture below or AIP page: http://www.aip.org/history/heisenberg/p08b.htm). The circular lens forms a cone of angle 2A from the electron. The electron is then illuminated from the left by gamma rays--high energy light which has the shortest wavelength. These yield the highest resolution, for according to a principle of wave optics, the microscope can resolve (that is, "see" or distinguish) objects to a size of dx, which is related to and to the wavelength L of the gamma ray, by the expression:
dx = L/(2sinA) (1)
However, in quantum mechanics, where a light wave can act like a particle, a gamma ray striking an electron gives it a kick. At the moment the light is diffracted by the electron into the microscope lens, the electron is thrust to the right. To be observed by the microscope, the gamma ray must be scattered into any angle within the cone of angle 2A. In quantum mechanics, the gamma ray carries momentum, as if it were a particle. The total momentum p is related to the wavelength by the formula
p = h / L, where h is Planck's constant. (2)
In the extreme case of diffraction of the gamma ray to the right edge of the lens, the total momentum in the x direction would be the sum of the electron's momentum P'x in the x direction and the gamma ray's momentum in the x direction:
P'x + (h sinA) / L', where L' is the wavelength of the deflected gamma ray.
In the other extreme, the observed gamma ray recoils backward, just hitting the left edge of the lens. In this case, the total momentum in the x direction is:
P''x - (h sinA) / L''.
The final x momentum in each case must equal the initial x momentum, since momentum is never lost (it is conserved). Therefore, the final x momenta are equal to each other:
P'x + (h sinA) / L' = P''x - (h sinA) / L'' (3)
If A is small, then the wavelengths are approximately the same,
L' ~ L" ~ L. So we have
P''x - P'x = dPx ~ 2h sinA / L (4)
Since dx = L/(2 sinA), we obtain a reciprocal relationship between the minimum uncertainty in the measured position,dx, of the electron along the x axis and the uncertainty in its momentum, dPx, in the x direction:
dPx ~ h / dx or dPx dx ~ h. (5)
For more than minimum uncertainty, the "greater than" sign may added.
Except for the factor of 4pi and an equal sign, this is Heisenberg's uncertainty relation for the simultaneous measurement of the position and momentum of an object
.
Reanalysis
To be seen by the microscope, the gamma ray must be scattered into any angle within the cone of angle 2A.
The microscope can resolve (that is, "see" or distinguish) objects to a size of dx, which is related to and to the wavelength L of the gamma ray, by the expression:
dx = L/(2sinA) (1)
It is the resolving limit of the microscope, and it is the uncertain quantity of the object's position.
Microscope can not see the object which the size is smaller than its resolving limit dx.
Therefore, to be seen by the microscope, the size of the electron must be larger than the resolving limit dx or equal to the resolving limit dx.
But if the size of the electron is larger than or equal to the resolving limit dx, electron will not be in the range dx. dx can not be deemed to be the uncertain quantity of the electron's position which can be seen by microscope, dx can be deemed to be the uncertain quantity of the electron's position which can not be seen by microscope only.
dx is the position's uncertain quantity of the electron which can not
be seen by microscope
To be seen by the microscope, the gamma ray must be scattered into any angle within the cone of angle 2A, so we can measure the
momentum of the electron.
dPx is the momentum's uncertain quantity of the electron which can be seen by microscope.
What relates to dx is the electron which the size is smaller than the
resolving limit .The electron is in the range dx, it can not be seen by the microscope, so its position is uncertain.
What relates to dPx is the electron which the size is larger than or equal to the resolving limit .The electron is not in the range dx, it can be seen by the microscope, so its position is certain.
Therefore, the electron which relate to dx and dPx respectively is not the same.
What we can see is the electron which the size is larger than or equal to the resolving limit dx and has certain position, dx = 0..
Quantum mechanics does not relate to the size of the object. but on the Experiment Of Heisenberg Gamma-Ray Microscope, the using of the microscope must relate to the size of the object, the size of the object which can be seen by the microscope must be larger than or equal to the resolving limit dx of the microscope, thus it does not exist alleged the uncertain quantity of the electron's position dx.
To be seen by the microscope, none but the size of the electron is larger than or equal to the resolving limit dx, the gamma ray which diffracted by the electron can be scattered into any angle within the cone of angle 2A, we can measure the momentum of the electron.
What we can see is the electron which has certain position, dx = 0, so that none but dx = 0��we can measure the momentum of the electron.
In Quantum mechanics, the momentum of the electron can be measured accurately when we measure the momentum of the electron only, therefore, we can gained dPx = 0.
Therefore ,
dPx dx =0. (6)
Ideal experiment 2
Experiment of single slit diffraction
Supposing a particle moves in Y direction originally and then passes a slit with width dx . So the uncertain quantity of the particle position in X direction is dx (see the picture below) , and interference occurs at the back slit . According to Wave Optics , the angle where No.1 min of interference pattern is , can be calculated by following formula :
sinA=L/2dx (1)
and
L=h/p where h is Planck��s constant. (2)
So uncertainty principle can be obtained
dPx dx ~ h (5)
Reanalysis
According to Newton first law , if the external force at the X direction does not affect particle ,the particle will keep the uniform straight line Motion State or Static State , and the motion at the Y direction unchangeable .Therefore , we can lead its position in the slit form its starting point .
The particle can have the certain position in the slit, and the uncertain quantity of the position dx =0 .
According to Newton first law , if the external force at the X direction does not affect particle,and the original motion at the Y direction is unchangeable , the momentum of the particle at the X direction will be Px=0 , and the uncertain quantity of the momentum will be dPx =0.
Get:
dPx dx =0. (6)
It has not any experiment to negate NEWTON FIRST LAW, in spite of quantum mechanics or classical mechanics, NEWTON FIRST LAW can be the same with the microcosmic world.
Under the above ideal experiment , it considered that slit��s width is the uncertain quantity of the particle��s position. But there is no reason for us to consider that the particle in the above experiment have position��s uncertain quantity certainly, and no reason for us to consider that the slit��s width is the uncertain quantity of the particle��s position.
Therefore, uncertainty principle
dPx dx ~ h (5)
which is derived from the above experiment is unreasonable .
Concluson
Thema: Viren & Co. Die Scannengine der Firma Sophos
Datum: 30.10.2002 ab 14:00 Uhr
Ort: Hoersaal der Rechen- und Kommunikationszentrums der RWTH Aachen
Ab 01. August 2002 hat die RWTH Aachen und FH Aachen eine Lizenzvereinbarung
mit der Firma Sophos geschlossen, die es allen Studenten, Mitarbeitern und
Einrichtungen der RWTH Aachen und FH Aachen ermöglicht, die Virenscanengine
der Firma Sophos auf jedem Rechner kostenlos zu installieren.
Informationen sowie das Anmeldeformualr zu dieser Veranstaltung finden Sie
unter:
http://www.rz.rwth-aachen.de/computertreff/
Alle Interessenten sind hierzu herzlich eingeladen.
Mit freundlichen Gruessen
Thomas Paetzold