Now, by following your instruction, both the compiling and running are fine
without error pop-up.
_mesh->set_color(_mesh->vertex_handle(intLoopBeginningVertexHandle), TriMesh::Color(0.7,0.286,0.5568,1.0));
It was still in red(selection status).
In code, we would like to change the color of those vertices which
formed a boundary of a region.
Send Openflipper mailing list submissions to
openflipper@lists.rwth-aachen.de
To subscribe or unsubscribe via the World Wide Web, visit
http://mailman.rwth-aachen.de/mailman/listinfo/openflipper
or, via email, send a message with subject or body 'help' to
openflipper-request@lists.rwth-aachen.de
You can reach the person managing the list at
openflipper-owner@lists.rwth-aachen.de
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Openflipper digest..."
Today's Topics:
1. How can we set a color for a vertex in code (xyliu80@gmail.com)
2. Re: How can we set a color for a vertex in code (Jan Möbius)
----------------------------------------------------------------------
Message: 1
Date: Sat, 21 Jul 2012 00:02:15 +0800
From: "xyliu80@gmail.com" <xyliu80@gmail.com>
To: openflipper <openflipper@lists.rwth-aachen.de>
Subject: [Openflipper] How can we set a color for a vertex in code
Message-ID: <201207210002102348624@gmail.com>
Content-Type: text/plain; charset="utf-8"
Dear Openflipper,
Currently, we encountered error while calling set_color command.
Here is our code line:
for(std::vector<int>::iterator iterAvi = verticeInSelection_.begin();
iterAvi != verticeInSelection_.end();
++iterAvi)
{
for(TriMesh::VertexVertexIter vv_it = _mesh->vv_iter(_mesh->vertex_handle(*iterAvi)); vv_it; ++vv_it)
{
if(!_mesh->status(vv_it).selected())
{
//_mesh->set_color(_mesh->vertex_handle(*iterAvi), TriMesh::Color(250, 0, 160));
vecBoundary_.push_back(*iterAvi);
break;
}
}
}
Could you kindly give us your suggestion?
Best Regards,
Xianyong Liu
Shanghai JiaoTong University
Office: +86 021 34204586
Mobile: +86 18817559980
E-mail: xyliu80@gmail.com
Address: 504 Room, SEIEE buiding 3#, 800 Dongchuan Rd,Min Hang,Shanghai,200240,China
From: openflipper-request
Date: 2012-07-16 18:00
To: openflipper
Subject: Openflipper Digest, Vol 29, Issue 2
Send Openflipper mailing list submissions to
openflipper@lists.rwth-aachen.de
To subscribe or unsubscribe via the World Wide Web, visit
http://mailman.rwth-aachen.de/mailman/listinfo/openflipper
or, via email, send a message with subject or body 'help' to
openflipper-request@lists.rwth-aachen.de
You can reach the person managing the list at
openflipper-owner@lists.rwth-aachen.de
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Openflipper digest..."
Today's Topics:
1. How to change the "Switch viewer layout" in the toolbar (HOTMAIL)
2. Re: How to change the "Switch viewer layout" in the toolbar
(Jan Möbius)
----------------------------------------------------------------------
Message: 1
Date: Mon, 16 Jul 2012 08:48:43 +0800
From: HOTMAIL <chinaairforce1@hotmail.com>
To: openflipper <openflipper@lists.rwth-aachen.de>
Subject: [Openflipper] How to change the "Switch viewer layout" in the
toolbar
Message-ID: <BLU0-SMTP1854A2D1D5E72F8CC06434294D40@phx.gbl>
Content-Type: text/plain; charset="gb2312"
Dear Openflipper,
In code, we are able to call the following instruction to switch the view mode from single to double.
RPC::callFunction("core", "MultiViewMode", 1);
However, I found that the combo of "Switch viewer layout" in the toolbar did not change.
It was still in the first item.
How could I change it in code?
Best Regards,
Xianyong Liu.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.rwth-aachen.de/pipermail/openflipper/attachments/20120716/891201dd/attachment-0001.html>
------------------------------
Message: 2
Date: Mon, 16 Jul 2012 09:03:06 +0200
From: Jan Möbius <moebius@cs.rwth-aachen.de>
To: openflipper@lists.rwth-aachen.de
Subject: Re: [Openflipper] How to change the "Switch viewer layout" in
the toolbar
Message-ID: <5003BCAA.2060002@cs.rwth-aachen.de>
Content-Type: text/plain; charset=ISO-8859-1
Hi,
this was a bug not a feature. The fix is now in the svn with revision
15019 and the box is correctly updated again, when the mode is switched
via RPC.
Best,
Jan Möbius
On 16.07.2012 02:48, HOTMAIL wrote:
> Dear Openflipper,
> In code, we are able to call the following instruction to switch the
> view mode from single to double.
>
> RPC::callFunction("core", "MultiViewMode", 1);
>
> However, I found that the combo of "Switch viewer layout" in the toolbar
> did not change.
> It was still in the first item.
>
> How could I change it in code?
>
> Best Regards,
> Xianyong Liu.
>
>
> _______________________________________________
> Openflipper mailing list
> Openflipper@lists.rwth-aachen.de
> http://mailman.rwth-aachen.de/mailman/listinfo/openflipper
--
Dipl.Inform. Jan Möbius
Department of Computer Science VIII
Aachen University of Technology (RWTH)
Ahornstrasse 55, 52074 Aachen, Germany
Phone ++49 (0)241 80-21817
Fax ++49 (0)241 80-22899
mailto:moebius@cs.rwth-aachen.de
http://www.rwth-graphics.de
------------------------------
_______________________________________________
Openflipper mailing list
Openflipper@lists.rwth-aachen.de
http://mailman.rwth-aachen.de/mailman/listinfo/openflipper
End of Openflipper Digest, Vol 29, Issue 2
******************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.rwth-aachen.de/pipermail/openflipper/attachments/20120721/69301507/attachment-0001.html>
------------------------------
Message: 2
Date: Fri, 20 Jul 2012 18:15:00 +0200
From: Jan Möbius <moebius@cs.rwth-aachen.de>
To: openflipper@lists.rwth-aachen.de
Subject: Re: [Openflipper] How can we set a color for a vertex in code
Message-ID: <50098404.8030807@cs.rwth-aachen.de>
Content-Type: text/plain; charset=ISO-8859-1
Hi,
OpenFlipper uses Vec4f as it's color format. So Your colors should be
defined as RGBA (range 0 ... 1 per component).
TriMesh::Color(1.0, 0.0, 0.0 ,1.0));
If that does not work, please send me the error produced by the compiler.
Best,
Jan Möbius
On 20.07.2012 18:02, xyliu80@gmail.com wrote:
> Dear Openflipper,
>
> Currently, we encountered error while calling set_color command.
>
> Here is our code line:
>
> for(std::vector<int>::iterator iterAvi = verticeInSelection_.begin();
> iterAvi != verticeInSelection_.end();
> ++iterAvi)
> {
> for(TriMesh::VertexVertexIter vv_it = _mesh->vv_iter(_mesh->vertex_handle(*iterAvi)); vv_it; ++vv_it)
> {
> if(!_mesh->status(vv_it).selected())
> {
> //_mesh->set_color(_mesh->vertex_handle(*iterAvi), TriMesh::Color(250, 0, 160));
> vecBoundary_.push_back(*iterAvi);
> break;
> }
> }
> }
>
> Could you kindly give us your suggestion?
>
> Best Regards,
> ------------------------------------------------------------------------
> *Xianyong Liu
> Shanghai JiaoTong University*
> *Office: +86 021 34204586
> Mobile: +86 18817559980
> E-mail: **xyliu80@gmail.com* <mailto:xyliu80@gmail.com>
>
> *Address: 504 Room, SEIEE buiding 3#, 800 Dongchuan Rd,Min
> Hang,Shanghai,200240,China*
>
>
>
> *From:* openflipper-request
> <mailto:openflipper-request@lists.rwth-aachen.de>
> *Date:* 2012-07-16 18:00
> *To:* openflipper <mailto:openflipper@lists.rwth-aachen.de>
> *Subject:* Openflipper Digest, Vol 29, Issue 2
> Send Openflipper mailing list submissions to
> openflipper@lists.rwth-aachen.de
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://mailman.rwth-aachen.de/mailman/listinfo/openflipper
> or, via email, send a message with subject or body 'help' to
> openflipper-request@lists.rwth-aachen.de
>
> You can reach the person managing the list at
> openflipper-owner@lists.rwth-aachen.de
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Openflipper digest..."
>
>
> Today's Topics:
>
> 1. How to change the "Switch viewer layout" in the toolbar (HOTMAIL)
> 2. Re: How to change the "Switch viewer layout" in the toolbar
> (Jan Möbius)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Mon, 16 Jul 2012 08:48:43 +0800
> From: HOTMAIL <chinaairforce1@hotmail.com>
> To: openflipper <openflipper@lists.rwth-aachen.de>
> Subject: [Openflipper] How to change the "Switch viewer layout" in the
> toolbar
> Message-ID: <BLU0-SMTP1854A2D1D5E72F8CC06434294D40@phx.gbl>
> Content-Type: text/plain; charset="gb2312"
>
> Dear Openflipper,
> In code, we are able to call the following instruction to switch the view mode from single to double.
>
> RPC::callFunction("core", "MultiViewMode", 1);
>
> However, I found that the combo of "Switch viewer layout" in the toolbar did not change.
> It was still in the first item.
>
> How could I change it in code?
>
> Best Regards,
> Xianyong Liu.
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://mailman.rwth-aachen.de/pipermail/openflipper/attachments/20120716/891201dd/attachment-0001.html>
>
> ------------------------------
>
> Message: 2
> Date: Mon, 16 Jul 2012 09:03:06 +0200
> From: Jan Möbius <moebius@cs.rwth-aachen.de>
> To: openflipper@lists.rwth-aachen.de
> Subject: Re: [Openflipper] How to change the "Switch viewer layout" in
> the toolbar
> Message-ID: <5003BCAA.2060002@cs.rwth-aachen.de>
> Content-Type: text/plain; charset=ISO-8859-1
>
> Hi,
>
> this was a bug not a feature. The fix is now in the svn with revision
> 15019 and the box is correctly updated again, when the mode is switched
> via RPC.
>
> Best,
> Jan Möbius
>
> On 16.07.2012 02:48, HOTMAIL wrote:
>> Dear Openflipper,
>> In code, we are able to call the following instruction to switch the
>> view mode from single to double.
>>
>> RPC::callFunction("core", "MultiViewMode", 1);
>>
>> However, I found that the combo of "Switch viewer layout" in the toolbar
>> did not change.
>> It was still in the first item.
>>
>> How could I change it in code?
>>
>> Best Regards,
>> Xianyong Liu.
>>
>>
>> _______________________________________________
>> Openflipper mailing list
>> Openflipper@lists.rwth-aachen.de
>> http://mailman.rwth-aachen.de/mailman/listinfo/openflipper
>
>
> --
> Dipl.Inform. Jan Möbius
> Department of Computer Science VIII
> Aachen University of Technology (RWTH)
> Ahornstrasse 55, 52074 Aachen, Germany
>
> Phone ++49 (0)241 80-21817
> Fax ++49 (0)241 80-22899
> mailto:moebius@cs.rwth-aachen.de
> http://www.rwth-graphics.de
>
>
> ------------------------------
>
> _______________________________________________
> Openflipper mailing list
> Openflipper@lists.rwth-aachen.de
> http://mailman.rwth-aachen.de/mailman/listinfo/openflipper
>
>
> End of Openflipper Digest, Vol 29, Issue 2
> ******************************************
>
>
> _______________________________________________
> Openflipper mailing list
> Openflipper@lists.rwth-aachen.de
> http://mailman.rwth-aachen.de/mailman/listinfo/openflipper
--
Dipl.Inform. Jan Möbius
Department of Computer Science VIII
Aachen University of Technology (RWTH)
Ahornstrasse 55, 52074 Aachen, Germany
Phone ++49 (0)241 80-21817
Fax ++49 (0)241 80-22899
mailto:moebius@cs.rwth-aachen.de
http://www.rwth-graphics.de
------------------------------
_______________________________________________
Openflipper mailing list
Openflipper@lists.rwth-aachen.de
http://mailman.rwth-aachen.de/mailman/listinfo/openflipper
End of Openflipper Digest, Vol 29, Issue 3
******************************************