Hi, I was trying to install Openflipper but when I run the make tool I get a undefined interface error. I send the output of the cmake configuration and also the error from the make tool below. This is a second run of the make tool, by the way. Thanks in advance, Joao Bettencourt ifisc@rizoma:~/bin/OpenFlipper-1.0/build$ cmake .. -- FTGL was not found. Make sure FTGL_LIBRARY and FTGL_INCLUDE_DIR are set to the directories containing the include and lib files for FTGL. If you do not have the library you will not be able to use the Text node. -- FTGL was not found. Make sure FTGL_LIBRARY and FTGL_INCLUDE_DIR are set to the directories containing the include and lib files for FTGL. If you do not have the library you will not be able to use the Text node. -- FTGL was not found. Make sure FTGL_LIBRARY and FTGL_INCLUDE_DIR are set to the directories containing the include and lib files for FTGL. If you do not have the library you will not be able to use the Text node. MESSAGEFTGL not found! Disabled ftgl support! -- Could NOT find Doxygen (missing: DOXYGEN_EXECUTABLE) -- Could NOT find Doxygen (missing: DOXYGEN_EXECUTABLE) ************************************************************ * ACG Buildsystem * * * * Package : OpenFlipper * * Version : 1.0 * ************************************************************ Plugin configure check results: TextureControl : Yes TypeSphere : Yes Backup : Yes FileBVH : Yes MeshRepair : Yes FilePla : Yes Move : Yes SkeletonEditing : Yes TypeLight : Yes FileOBJ : Yes FileLgt : Yes FileSPH : Yes Laplace : Yes Info : Yes FileOfv : Yes Slice : Yes Color : Yes SimpleSmoother : Yes TypeSkeleton : Yes Subdivider : Yes FilePLY : Yes TypePlane : Yes TypePolyMesh : Yes TypeTriangleMesh : Yes TypeBSplineCurve : Yes FileSkeleton : Yes Selection : Yes IsotropicRemesher : Yes VSI : Yes FileOM : Yes FileSTL : Yes FileSKL : Yes Topology : Yes INI : Yes SkeletalAnimation : Yes TypeBSplineSurface : Yes Print : Yes Scripting : Yes Smoother : Yes ViewControl : Yes Datacontrol : Yes Decimater : Yes FileOFF : Yes MeanCurvature : Yes FileScript : Yes ************************************************************ -- Configuring done -- Generating done -- Build files have been written to: /home/ifisc/bin/OpenFlipper-1.0/build ifisc@rizoma:~/bin/OpenFlipper-1.0/build$ make [ 24%] Built target OpenMeshCore [ 24%] Built target OpenMeshCoreStatic [ 24%] Built target OpenMeshTools [ 24%] Built target OpenMeshToolsStatic [ 24%] Built target ACG [ 24%] Built target translations_target_PluginLib [ 24%] Generating moc_QtGraphicsButton.cpp /home/ifisc/bin/OpenFlipper-1.0/OpenFlipper/widgets/glWidget/QtGraphicsButton.hh:67: Error: Undefined interface make[2]: *** [OpenFlipper/PluginLib/moc_QtGraphicsButton.cpp] Error 1 make[1]: *** [OpenFlipper/PluginLib/CMakeFiles/PluginLib.dir/all] Error 2 make: *** [all] Error 2 ifisc@rizoma:~/bin/OpenFlipper-1.0/build$ Joao Bettencourt ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.
Hi, this problem may be caused by an too old Qt Version. You need at least version 4.6 to compile OpenFlipper. Best Regards, Jan Möbius On 21.02.2011 14:06, Joao Paulo Horta Bettencourt wrote:
Hi,
I was trying to install Openflipper but when I run the make tool I get a undefined interface error.
I send the output of the cmake configuration and also the error from the make tool below. This is a second run of the make tool, by the way.
Thanks in advance,
Joao Bettencourt
ifisc@rizoma:~/bin/OpenFlipper-1.0/build$ cmake .. -- FTGL was not found. Make sure FTGL_LIBRARY and FTGL_INCLUDE_DIR are set to the directories containing the include and lib files for FTGL. If you do not have the library you will not be able to use the Text node. -- FTGL was not found. Make sure FTGL_LIBRARY and FTGL_INCLUDE_DIR are set to the directories containing the include and lib files for FTGL. If you do not have the library you will not be able to use the Text node. -- FTGL was not found. Make sure FTGL_LIBRARY and FTGL_INCLUDE_DIR are set to the directories containing the include and lib files for FTGL. If you do not have the library you will not be able to use the Text node. MESSAGEFTGL not found! Disabled ftgl support! -- Could NOT find Doxygen (missing: DOXYGEN_EXECUTABLE) -- Could NOT find Doxygen (missing: DOXYGEN_EXECUTABLE)
************************************************************ * ACG Buildsystem * * * * Package : OpenFlipper * * Version : 1.0 * ************************************************************
Plugin configure check results:
TextureControl : Yes TypeSphere : Yes Backup : Yes FileBVH : Yes MeshRepair : Yes FilePla : Yes Move : Yes SkeletonEditing : Yes TypeLight : Yes FileOBJ : Yes FileLgt : Yes FileSPH : Yes Laplace : Yes Info : Yes FileOfv : Yes Slice : Yes Color : Yes SimpleSmoother : Yes TypeSkeleton : Yes Subdivider : Yes FilePLY : Yes TypePlane : Yes TypePolyMesh : Yes TypeTriangleMesh : Yes TypeBSplineCurve : Yes FileSkeleton : Yes Selection : Yes IsotropicRemesher : Yes VSI : Yes FileOM : Yes FileSTL : Yes FileSKL : Yes Topology : Yes INI : Yes SkeletalAnimation : Yes TypeBSplineSurface : Yes Print : Yes Scripting : Yes Smoother : Yes ViewControl : Yes Datacontrol : Yes Decimater : Yes FileOFF : Yes MeanCurvature : Yes FileScript : Yes
************************************************************
-- Configuring done -- Generating done -- Build files have been written to: /home/ifisc/bin/OpenFlipper-1.0/build ifisc@rizoma:~/bin/OpenFlipper-1.0/build$ make [ 24%] Built target OpenMeshCore [ 24%] Built target OpenMeshCoreStatic [ 24%] Built target OpenMeshTools [ 24%] Built target OpenMeshToolsStatic [ 24%] Built target ACG [ 24%] Built target translations_target_PluginLib [ 24%] Generating moc_QtGraphicsButton.cpp /home/ifisc/bin/OpenFlipper-1.0/OpenFlipper/widgets/glWidget/QtGraphicsButton.hh:67: Error: Undefined interface make[2]: *** [OpenFlipper/PluginLib/moc_QtGraphicsButton.cpp] Error 1 make[1]: *** [OpenFlipper/PluginLib/CMakeFiles/PluginLib.dir/all] Error 2 make: *** [all] Error 2 ifisc@rizoma:~/bin/OpenFlipper-1.0/build$
Joao Bettencourt
---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.
_______________________________________________ Openflipper mailing list Openflipper@lists.rwth-aachen.de http://mailman.rwth-aachen.de/mailman/listinfo/openflipper
-- Dipl.Inform. Jan Möbius Department of Computer Science VIII Aachen University of Technology (RWTH) Ahornstrasse 55, 52074 Aachen, Germany Phone ++49 (0)241 80-21817 Fax ++49 (0)241 80-22899 mailto:moebius@cs.rwth-aachen.de http://www.rwth-graphics.de
Hi Jan, Thanks for the tip. I've checked and I am using Qt-4.7.1. I have also checked where is qt4 and it is on usr/lib/qt4 and usr/include/qt4. Regards, Joao Quoting Jan Möbius <moebius@cs.rwth-aachen.de>:
Hi,
this problem may be caused by an too old Qt Version. You need at least version 4.6 to compile OpenFlipper.
Best Regards, Jan Möbius
On 21.02.2011 14:06, Joao Paulo Horta Bettencourt wrote:
Hi,
I was trying to install Openflipper but when I run the make tool I get a undefined interface error.
I send the output of the cmake configuration and also the error from the make tool below. This is a second run of the make tool, by the way.
Thanks in advance,
Joao Bettencourt
ifisc@rizoma:~/bin/OpenFlipper-1.0/build$ cmake .. -- FTGL was not found. Make sure FTGL_LIBRARY and FTGL_INCLUDE_DIR are set to the directories containing the include and lib files for FTGL. If you do not have the library you will not be able to use the Text node. -- FTGL was not found. Make sure FTGL_LIBRARY and FTGL_INCLUDE_DIR are set to the directories containing the include and lib files for FTGL. If you do not have the library you will not be able to use the Text node. -- FTGL was not found. Make sure FTGL_LIBRARY and FTGL_INCLUDE_DIR are set to the directories containing the include and lib files for FTGL. If you do not have the library you will not be able to use the Text node. MESSAGEFTGL not found! Disabled ftgl support! -- Could NOT find Doxygen (missing: DOXYGEN_EXECUTABLE) -- Could NOT find Doxygen (missing: DOXYGEN_EXECUTABLE)
************************************************************ * ACG Buildsystem * * * * Package : OpenFlipper * * Version : 1.0 * ************************************************************
Plugin configure check results:
TextureControl : Yes TypeSphere : Yes Backup : Yes FileBVH : Yes MeshRepair : Yes FilePla : Yes Move : Yes SkeletonEditing : Yes TypeLight : Yes FileOBJ : Yes FileLgt : Yes FileSPH : Yes Laplace : Yes Info : Yes FileOfv : Yes Slice : Yes Color : Yes SimpleSmoother : Yes TypeSkeleton : Yes Subdivider : Yes FilePLY : Yes TypePlane : Yes TypePolyMesh : Yes TypeTriangleMesh : Yes TypeBSplineCurve : Yes FileSkeleton : Yes Selection : Yes IsotropicRemesher : Yes VSI : Yes FileOM : Yes FileSTL : Yes FileSKL : Yes Topology : Yes INI : Yes SkeletalAnimation : Yes TypeBSplineSurface : Yes Print : Yes Scripting : Yes Smoother : Yes ViewControl : Yes Datacontrol : Yes Decimater : Yes FileOFF : Yes MeanCurvature : Yes FileScript : Yes
************************************************************
-- Configuring done -- Generating done -- Build files have been written to: /home/ifisc/bin/OpenFlipper-1.0/build ifisc@rizoma:~/bin/OpenFlipper-1.0/build$ make [ 24%] Built target OpenMeshCore [ 24%] Built target OpenMeshCoreStatic [ 24%] Built target OpenMeshTools [ 24%] Built target OpenMeshToolsStatic [ 24%] Built target ACG [ 24%] Built target translations_target_PluginLib [ 24%] Generating moc_QtGraphicsButton.cpp /home/ifisc/bin/OpenFlipper-1.0/OpenFlipper/widgets/glWidget/QtGraphicsButton.hh:67: Error: Undefined interface make[2]: *** [OpenFlipper/PluginLib/moc_QtGraphicsButton.cpp] Error 1 make[1]: *** [OpenFlipper/PluginLib/CMakeFiles/PluginLib.dir/all] Error 2 make: *** [all] Error 2 ifisc@rizoma:~/bin/OpenFlipper-1.0/build$
Joao Bettencourt
---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.
_______________________________________________ Openflipper mailing list Openflipper@lists.rwth-aachen.de http://mailman.rwth-aachen.de/mailman/listinfo/openflipper
-- Dipl.Inform. Jan Möbius Department of Computer Science VIII Aachen University of Technology (RWTH) Ahornstrasse 55, 52074 Aachen, Germany
Phone ++49 (0)241 80-21817 Fax ++49 (0)241 80-22899 mailto:moebius@cs.rwth-aachen.de http://www.rwth-graphics.de _______________________________________________ Openflipper mailing list Openflipper@lists.rwth-aachen.de http://mailman.rwth-aachen.de/mailman/listinfo/openflipper
Joao Bettencourt ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.
Hi, do you have this file: /usr/include/qt4/QtGui/QGraphicsItem Regards, Jan On 23.02.2011 15:26, Joao Paulo Horta Bettencourt wrote:
Hi Jan,
Thanks for the tip. I've checked and I am using Qt-4.7.1. I have also checked where is qt4 and it is on usr/lib/qt4 and usr/include/qt4.
Regards,
Joao
Quoting Jan Möbius <moebius@cs.rwth-aachen.de>:
Hi,
this problem may be caused by an too old Qt Version. You need at least version 4.6 to compile OpenFlipper.
Best Regards, Jan Möbius
On 21.02.2011 14:06, Joao Paulo Horta Bettencourt wrote:
Hi,
I was trying to install Openflipper but when I run the make tool I get a undefined interface error.
I send the output of the cmake configuration and also the error from the make tool below. This is a second run of the make tool, by the way.
Thanks in advance,
Joao Bettencourt
ifisc@rizoma:~/bin/OpenFlipper-1.0/build$ cmake .. -- FTGL was not found. Make sure FTGL_LIBRARY and FTGL_INCLUDE_DIR are set to the directories containing the include and lib files for FTGL. If you do not have the library you will not be able to use the Text node. -- FTGL was not found. Make sure FTGL_LIBRARY and FTGL_INCLUDE_DIR are set to the directories containing the include and lib files for FTGL. If you do not have the library you will not be able to use the Text node. -- FTGL was not found. Make sure FTGL_LIBRARY and FTGL_INCLUDE_DIR are set to the directories containing the include and lib files for FTGL. If you do not have the library you will not be able to use the Text node. MESSAGEFTGL not found! Disabled ftgl support! -- Could NOT find Doxygen (missing: DOXYGEN_EXECUTABLE) -- Could NOT find Doxygen (missing: DOXYGEN_EXECUTABLE)
************************************************************ * ACG Buildsystem * * * * Package : OpenFlipper * * Version : 1.0 * ************************************************************
Plugin configure check results:
TextureControl : Yes TypeSphere : Yes Backup : Yes FileBVH : Yes MeshRepair : Yes FilePla : Yes Move : Yes SkeletonEditing : Yes TypeLight : Yes FileOBJ : Yes FileLgt : Yes FileSPH : Yes Laplace : Yes Info : Yes FileOfv : Yes Slice : Yes Color : Yes SimpleSmoother : Yes TypeSkeleton : Yes Subdivider : Yes FilePLY : Yes TypePlane : Yes TypePolyMesh : Yes TypeTriangleMesh : Yes TypeBSplineCurve : Yes FileSkeleton : Yes Selection : Yes IsotropicRemesher : Yes VSI : Yes FileOM : Yes FileSTL : Yes FileSKL : Yes Topology : Yes INI : Yes SkeletalAnimation : Yes TypeBSplineSurface : Yes Print : Yes Scripting : Yes Smoother : Yes ViewControl : Yes Datacontrol : Yes Decimater : Yes FileOFF : Yes MeanCurvature : Yes FileScript : Yes
************************************************************
-- Configuring done -- Generating done -- Build files have been written to: /home/ifisc/bin/OpenFlipper-1.0/build ifisc@rizoma:~/bin/OpenFlipper-1.0/build$ make [ 24%] Built target OpenMeshCore [ 24%] Built target OpenMeshCoreStatic [ 24%] Built target OpenMeshTools [ 24%] Built target OpenMeshToolsStatic [ 24%] Built target ACG [ 24%] Built target translations_target_PluginLib [ 24%] Generating moc_QtGraphicsButton.cpp /home/ifisc/bin/OpenFlipper-1.0/OpenFlipper/widgets/glWidget/QtGraphicsButton.hh:67:
Error: Undefined interface make[2]: *** [OpenFlipper/PluginLib/moc_QtGraphicsButton.cpp] Error 1 make[1]: *** [OpenFlipper/PluginLib/CMakeFiles/PluginLib.dir/all] Error 2 make: *** [all] Error 2 ifisc@rizoma:~/bin/OpenFlipper-1.0/build$
Joao Bettencourt
---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.
_______________________________________________ Openflipper mailing list Openflipper@lists.rwth-aachen.de http://mailman.rwth-aachen.de/mailman/listinfo/openflipper
-- Dipl.Inform. Jan Möbius Department of Computer Science VIII Aachen University of Technology (RWTH) Ahornstrasse 55, 52074 Aachen, Germany
Phone ++49 (0)241 80-21817 Fax ++49 (0)241 80-22899 mailto:moebius@cs.rwth-aachen.de http://www.rwth-graphics.de _______________________________________________ Openflipper mailing list Openflipper@lists.rwth-aachen.de http://mailman.rwth-aachen.de/mailman/listinfo/openflipper
Joao Bettencourt
---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.
_______________________________________________ Openflipper mailing list Openflipper@lists.rwth-aachen.de http://mailman.rwth-aachen.de/mailman/listinfo/openflipper
-- Dipl.Inform. Jan Möbius Department of Computer Science VIII Aachen University of Technology (RWTH) Ahornstrasse 55, 52074 Aachen, Germany Phone ++49 (0)241 80-21817 Fax ++49 (0)241 80-22899 mailto:moebius@cs.rwth-aachen.de http://www.rwth-graphics.de
Hi Jan, I did not find it. Then I copyed it from /usr/local/Trolltech/Qt-4.7.1/include/QtGui to /usr/include/qt4/QtGui but the problem remained. Should I install Qt-4.7.1 again? Regards, Joao Quoting Jan Möbius <moebius@cs.rwth-aachen.de>:
Hi,
do you have this file: /usr/include/qt4/QtGui/QGraphicsItem
Regards, Jan
On 23.02.2011 15:26, Joao Paulo Horta Bettencourt wrote:
Hi Jan,
Thanks for the tip. I've checked and I am using Qt-4.7.1. I have also checked where is qt4 and it is on usr/lib/qt4 and usr/include/qt4.
Regards,
Joao
Quoting Jan Möbius <moebius@cs.rwth-aachen.de>:
Hi,
this problem may be caused by an too old Qt Version. You need at least version 4.6 to compile OpenFlipper.
Best Regards, Jan Möbius
On 21.02.2011 14:06, Joao Paulo Horta Bettencourt wrote:
Hi,
I was trying to install Openflipper but when I run the make tool I get a undefined interface error.
I send the output of the cmake configuration and also the error from the make tool below. This is a second run of the make tool, by the way.
Thanks in advance,
Joao Bettencourt
ifisc@rizoma:~/bin/OpenFlipper-1.0/build$ cmake .. -- FTGL was not found. Make sure FTGL_LIBRARY and FTGL_INCLUDE_DIR are set to the directories containing the include and lib files for FTGL. If you do not have the library you will not be able to use the Text node. -- FTGL was not found. Make sure FTGL_LIBRARY and FTGL_INCLUDE_DIR are set to the directories containing the include and lib files for FTGL. If you do not have the library you will not be able to use the Text node. -- FTGL was not found. Make sure FTGL_LIBRARY and FTGL_INCLUDE_DIR are set to the directories containing the include and lib files for FTGL. If you do not have the library you will not be able to use the Text node. MESSAGEFTGL not found! Disabled ftgl support! -- Could NOT find Doxygen (missing: DOXYGEN_EXECUTABLE) -- Could NOT find Doxygen (missing: DOXYGEN_EXECUTABLE)
************************************************************ * ACG Buildsystem * * * * Package : OpenFlipper * * Version : 1.0 * ************************************************************
Plugin configure check results:
TextureControl : Yes TypeSphere : Yes Backup : Yes FileBVH : Yes MeshRepair : Yes FilePla : Yes Move : Yes SkeletonEditing : Yes TypeLight : Yes FileOBJ : Yes FileLgt : Yes FileSPH : Yes Laplace : Yes Info : Yes FileOfv : Yes Slice : Yes Color : Yes SimpleSmoother : Yes TypeSkeleton : Yes Subdivider : Yes FilePLY : Yes TypePlane : Yes TypePolyMesh : Yes TypeTriangleMesh : Yes TypeBSplineCurve : Yes FileSkeleton : Yes Selection : Yes IsotropicRemesher : Yes VSI : Yes FileOM : Yes FileSTL : Yes FileSKL : Yes Topology : Yes INI : Yes SkeletalAnimation : Yes TypeBSplineSurface : Yes Print : Yes Scripting : Yes Smoother : Yes ViewControl : Yes Datacontrol : Yes Decimater : Yes FileOFF : Yes MeanCurvature : Yes FileScript : Yes
************************************************************
-- Configuring done -- Generating done -- Build files have been written to: /home/ifisc/bin/OpenFlipper-1.0/build ifisc@rizoma:~/bin/OpenFlipper-1.0/build$ make [ 24%] Built target OpenMeshCore [ 24%] Built target OpenMeshCoreStatic [ 24%] Built target OpenMeshTools [ 24%] Built target OpenMeshToolsStatic [ 24%] Built target ACG [ 24%] Built target translations_target_PluginLib [ 24%] Generating moc_QtGraphicsButton.cpp /home/ifisc/bin/OpenFlipper-1.0/OpenFlipper/widgets/glWidget/QtGraphicsButton.hh:67:
Error: Undefined interface make[2]: *** [OpenFlipper/PluginLib/moc_QtGraphicsButton.cpp] Error 1 make[1]: *** [OpenFlipper/PluginLib/CMakeFiles/PluginLib.dir/all] Error 2 make: *** [all] Error 2 ifisc@rizoma:~/bin/OpenFlipper-1.0/build$
Joao Bettencourt
---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.
_______________________________________________ Openflipper mailing list Openflipper@lists.rwth-aachen.de http://mailman.rwth-aachen.de/mailman/listinfo/openflipper
-- Dipl.Inform. Jan Möbius Department of Computer Science VIII Aachen University of Technology (RWTH) Ahornstrasse 55, 52074 Aachen, Germany
Phone ++49 (0)241 80-21817 Fax ++49 (0)241 80-22899 mailto:moebius@cs.rwth-aachen.de http://www.rwth-graphics.de _______________________________________________ Openflipper mailing list Openflipper@lists.rwth-aachen.de http://mailman.rwth-aachen.de/mailman/listinfo/openflipper
Joao Bettencourt
---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.
_______________________________________________ Openflipper mailing list Openflipper@lists.rwth-aachen.de http://mailman.rwth-aachen.de/mailman/listinfo/openflipper
-- Dipl.Inform. Jan Möbius Department of Computer Science VIII Aachen University of Technology (RWTH) Ahornstrasse 55, 52074 Aachen, Germany
Phone ++49 (0)241 80-21817 Fax ++49 (0)241 80-22899 mailto:moebius@cs.rwth-aachen.de http://www.rwth-graphics.de _______________________________________________ Openflipper mailing list Openflipper@lists.rwth-aachen.de http://mailman.rwth-aachen.de/mailman/listinfo/openflipper
Joao Bettencourt ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.
Hi, I have some questions to fix your build problems:\ - Do you have multiple Qt installations? - What distribution or operating system do you use? - Did you install qt via the os package management (looks like a manual install) - What is your path variable set to? Regards, Jan On 25.02.2011 10:42, Joao Paulo Horta Bettencourt wrote:
Hi Jan,
I did not find it. Then I copyed it from /usr/local/Trolltech/Qt-4.7.1/include/QtGui to /usr/include/qt4/QtGui but the problem remained.
Should I install Qt-4.7.1 again?
Regards,
Joao
Quoting Jan Möbius <moebius@cs.rwth-aachen.de>:
Hi,
do you have this file: /usr/include/qt4/QtGui/QGraphicsItem
Regards, Jan
On 23.02.2011 15:26, Joao Paulo Horta Bettencourt wrote:
Hi Jan,
Thanks for the tip. I've checked and I am using Qt-4.7.1. I have also checked where is qt4 and it is on usr/lib/qt4 and usr/include/qt4.
Regards,
Joao
Quoting Jan Möbius <moebius@cs.rwth-aachen.de>:
Hi,
this problem may be caused by an too old Qt Version. You need at least version 4.6 to compile OpenFlipper.
Best Regards, Jan Möbius
On 21.02.2011 14:06, Joao Paulo Horta Bettencourt wrote:
Hi,
I was trying to install Openflipper but when I run the make tool I get a undefined interface error.
I send the output of the cmake configuration and also the error from the make tool below. This is a second run of the make tool, by the way.
Thanks in advance,
Joao Bettencourt
ifisc@rizoma:~/bin/OpenFlipper-1.0/build$ cmake .. -- FTGL was not found. Make sure FTGL_LIBRARY and FTGL_INCLUDE_DIR are set to the directories containing the include and lib files for FTGL. If you do not have the library you will not be able to use the Text node. -- FTGL was not found. Make sure FTGL_LIBRARY and FTGL_INCLUDE_DIR are set to the directories containing the include and lib files for FTGL. If you do not have the library you will not be able to use the Text node. -- FTGL was not found. Make sure FTGL_LIBRARY and FTGL_INCLUDE_DIR are set to the directories containing the include and lib files for FTGL. If you do not have the library you will not be able to use the Text node. MESSAGEFTGL not found! Disabled ftgl support! -- Could NOT find Doxygen (missing: DOXYGEN_EXECUTABLE) -- Could NOT find Doxygen (missing: DOXYGEN_EXECUTABLE)
************************************************************ * ACG Buildsystem * * * * Package : OpenFlipper * * Version : 1.0 * ************************************************************
Plugin configure check results:
TextureControl : Yes TypeSphere : Yes Backup : Yes FileBVH : Yes MeshRepair : Yes FilePla : Yes Move : Yes SkeletonEditing : Yes TypeLight : Yes FileOBJ : Yes FileLgt : Yes FileSPH : Yes Laplace : Yes Info : Yes FileOfv : Yes Slice : Yes Color : Yes SimpleSmoother : Yes TypeSkeleton : Yes Subdivider : Yes FilePLY : Yes TypePlane : Yes TypePolyMesh : Yes TypeTriangleMesh : Yes TypeBSplineCurve : Yes FileSkeleton : Yes Selection : Yes IsotropicRemesher : Yes VSI : Yes FileOM : Yes FileSTL : Yes FileSKL : Yes Topology : Yes INI : Yes SkeletalAnimation : Yes TypeBSplineSurface : Yes Print : Yes Scripting : Yes Smoother : Yes ViewControl : Yes Datacontrol : Yes Decimater : Yes FileOFF : Yes MeanCurvature : Yes FileScript : Yes
************************************************************
-- Configuring done -- Generating done -- Build files have been written to: /home/ifisc/bin/OpenFlipper-1.0/build ifisc@rizoma:~/bin/OpenFlipper-1.0/build$ make [ 24%] Built target OpenMeshCore [ 24%] Built target OpenMeshCoreStatic [ 24%] Built target OpenMeshTools [ 24%] Built target OpenMeshToolsStatic [ 24%] Built target ACG [ 24%] Built target translations_target_PluginLib [ 24%] Generating moc_QtGraphicsButton.cpp /home/ifisc/bin/OpenFlipper-1.0/OpenFlipper/widgets/glWidget/QtGraphicsButton.hh:67:
Error: Undefined interface make[2]: *** [OpenFlipper/PluginLib/moc_QtGraphicsButton.cpp] Error 1 make[1]: *** [OpenFlipper/PluginLib/CMakeFiles/PluginLib.dir/all] Error 2 make: *** [all] Error 2 ifisc@rizoma:~/bin/OpenFlipper-1.0/build$
Joao Bettencourt
---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.
_______________________________________________ Openflipper mailing list Openflipper@lists.rwth-aachen.de http://mailman.rwth-aachen.de/mailman/listinfo/openflipper
-- Dipl.Inform. Jan Möbius Department of Computer Science VIII Aachen University of Technology (RWTH) Ahornstrasse 55, 52074 Aachen, Germany
Phone ++49 (0)241 80-21817 Fax ++49 (0)241 80-22899 mailto:moebius@cs.rwth-aachen.de http://www.rwth-graphics.de _______________________________________________ Openflipper mailing list Openflipper@lists.rwth-aachen.de http://mailman.rwth-aachen.de/mailman/listinfo/openflipper
Joao Bettencourt
---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.
_______________________________________________ Openflipper mailing list Openflipper@lists.rwth-aachen.de http://mailman.rwth-aachen.de/mailman/listinfo/openflipper
-- Dipl.Inform. Jan Möbius Department of Computer Science VIII Aachen University of Technology (RWTH) Ahornstrasse 55, 52074 Aachen, Germany
Phone ++49 (0)241 80-21817 Fax ++49 (0)241 80-22899 mailto:moebius@cs.rwth-aachen.de http://www.rwth-graphics.de _______________________________________________ Openflipper mailing list Openflipper@lists.rwth-aachen.de http://mailman.rwth-aachen.de/mailman/listinfo/openflipper
Joao Bettencourt
---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.
_______________________________________________ Openflipper mailing list Openflipper@lists.rwth-aachen.de http://mailman.rwth-aachen.de/mailman/listinfo/openflipper
-- Dipl.Inform. Jan Möbius Department of Computer Science VIII Aachen University of Technology (RWTH) Ahornstrasse 55, 52074 Aachen, Germany Phone ++49 (0)241 80-21817 Fax ++49 (0)241 80-22899 mailto:moebius@cs.rwth-aachen.de http://www.rwth-graphics.de
Hi, I have both Qt3 and Qt4 installed. I am using linux Ubuntu 9.10 but I did not used the package management system to install Qt4, instead I downloaded the source from Qt4 website and installed it manually. My path variable is: ifisc@rizoma:~$ echo $PATH /home/ifisc/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/home/ifisc/bin/cmake-2.8.3-Linux-i386/bin:/home/ifisc/libs/m4-lib/bin:/usr/local/Trolltech/Qt-4.7.1/bin ifisc@rizoma:~$ I've tried to uninstall the Qt4 that I had installed manually but I could not find the uninstall script. I wanted to use the package management system. Thanks in advance, Joao Bettencourt Quoting Jan Möbius <moebius@cs.rwth-aachen.de>:
Hi,
I have some questions to fix your build problems:\
- Do you have multiple Qt installations? - What distribution or operating system do you use? - Did you install qt via the os package management (looks like a manual install) - What is your path variable set to?
Regards, Jan
On 25.02.2011 10:42, Joao Paulo Horta Bettencourt wrote:
Hi Jan,
I did not find it. Then I copyed it from /usr/local/Trolltech/Qt-4.7.1/include/QtGui to /usr/include/qt4/QtGui but the problem remained.
Should I install Qt-4.7.1 again?
Regards,
Joao
Quoting Jan Möbius <moebius@cs.rwth-aachen.de>:
Hi,
do you have this file: /usr/include/qt4/QtGui/QGraphicsItem
Regards, Jan
On 23.02.2011 15:26, Joao Paulo Horta Bettencourt wrote:
Hi Jan,
Thanks for the tip. I've checked and I am using Qt-4.7.1. I have also checked where is qt4 and it is on usr/lib/qt4 and usr/include/qt4.
Regards,
Joao
Quoting Jan Möbius <moebius@cs.rwth-aachen.de>:
Hi,
this problem may be caused by an too old Qt Version. You need at least version 4.6 to compile OpenFlipper.
Best Regards, Jan Möbius
On 21.02.2011 14:06, Joao Paulo Horta Bettencourt wrote:
Hi,
I was trying to install Openflipper but when I run the make tool I get a undefined interface error.
I send the output of the cmake configuration and also the error from the make tool below. This is a second run of the make tool, by the way.
Thanks in advance,
Joao Bettencourt
ifisc@rizoma:~/bin/OpenFlipper-1.0/build$ cmake .. -- FTGL was not found. Make sure FTGL_LIBRARY and FTGL_INCLUDE_DIR are set to the directories containing the include and lib files for FTGL. If you do not have the library you will not be able to use the Text node. -- FTGL was not found. Make sure FTGL_LIBRARY and FTGL_INCLUDE_DIR are set to the directories containing the include and lib files for FTGL. If you do not have the library you will not be able to use the Text node. -- FTGL was not found. Make sure FTGL_LIBRARY and FTGL_INCLUDE_DIR are set to the directories containing the include and lib files for FTGL. If you do not have the library you will not be able to use the Text node. MESSAGEFTGL not found! Disabled ftgl support! -- Could NOT find Doxygen (missing: DOXYGEN_EXECUTABLE) -- Could NOT find Doxygen (missing: DOXYGEN_EXECUTABLE)
************************************************************ * ACG Buildsystem * * * * Package : OpenFlipper * * Version : 1.0 * ************************************************************
Plugin configure check results:
TextureControl : Yes TypeSphere : Yes Backup : Yes FileBVH : Yes MeshRepair : Yes FilePla : Yes Move : Yes SkeletonEditing : Yes TypeLight : Yes FileOBJ : Yes FileLgt : Yes FileSPH : Yes Laplace : Yes Info : Yes FileOfv : Yes Slice : Yes Color : Yes SimpleSmoother : Yes TypeSkeleton : Yes Subdivider : Yes FilePLY : Yes TypePlane : Yes TypePolyMesh : Yes TypeTriangleMesh : Yes TypeBSplineCurve : Yes FileSkeleton : Yes Selection : Yes IsotropicRemesher : Yes VSI : Yes FileOM : Yes FileSTL : Yes FileSKL : Yes Topology : Yes INI : Yes SkeletalAnimation : Yes TypeBSplineSurface : Yes Print : Yes Scripting : Yes Smoother : Yes ViewControl : Yes Datacontrol : Yes Decimater : Yes FileOFF : Yes MeanCurvature : Yes FileScript : Yes
************************************************************
-- Configuring done -- Generating done -- Build files have been written to: /home/ifisc/bin/OpenFlipper-1.0/build ifisc@rizoma:~/bin/OpenFlipper-1.0/build$ make [ 24%] Built target OpenMeshCore [ 24%] Built target OpenMeshCoreStatic [ 24%] Built target OpenMeshTools [ 24%] Built target OpenMeshToolsStatic [ 24%] Built target ACG [ 24%] Built target translations_target_PluginLib [ 24%] Generating moc_QtGraphicsButton.cpp /home/ifisc/bin/OpenFlipper-1.0/OpenFlipper/widgets/glWidget/QtGraphicsButton.hh:67:
Error: Undefined interface make[2]: *** [OpenFlipper/PluginLib/moc_QtGraphicsButton.cpp] Error 1 make[1]: *** [OpenFlipper/PluginLib/CMakeFiles/PluginLib.dir/all] Error 2 make: *** [all] Error 2 ifisc@rizoma:~/bin/OpenFlipper-1.0/build$
Joao Bettencourt
---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.
_______________________________________________ Openflipper mailing list Openflipper@lists.rwth-aachen.de http://mailman.rwth-aachen.de/mailman/listinfo/openflipper
-- Dipl.Inform. Jan Möbius Department of Computer Science VIII Aachen University of Technology (RWTH) Ahornstrasse 55, 52074 Aachen, Germany
Phone ++49 (0)241 80-21817 Fax ++49 (0)241 80-22899 mailto:moebius@cs.rwth-aachen.de http://www.rwth-graphics.de _______________________________________________ Openflipper mailing list Openflipper@lists.rwth-aachen.de http://mailman.rwth-aachen.de/mailman/listinfo/openflipper
Joao Bettencourt
---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.
_______________________________________________ Openflipper mailing list Openflipper@lists.rwth-aachen.de http://mailman.rwth-aachen.de/mailman/listinfo/openflipper
-- Dipl.Inform. Jan Möbius Department of Computer Science VIII Aachen University of Technology (RWTH) Ahornstrasse 55, 52074 Aachen, Germany
Phone ++49 (0)241 80-21817 Fax ++49 (0)241 80-22899 mailto:moebius@cs.rwth-aachen.de http://www.rwth-graphics.de _______________________________________________ Openflipper mailing list Openflipper@lists.rwth-aachen.de http://mailman.rwth-aachen.de/mailman/listinfo/openflipper
Joao Bettencourt
---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.
_______________________________________________ Openflipper mailing list Openflipper@lists.rwth-aachen.de http://mailman.rwth-aachen.de/mailman/listinfo/openflipper
-- Dipl.Inform. Jan Möbius Department of Computer Science VIII Aachen University of Technology (RWTH) Ahornstrasse 55, 52074 Aachen, Germany
Phone ++49 (0)241 80-21817 Fax ++49 (0)241 80-22899 mailto:moebius@cs.rwth-aachen.de http://www.rwth-graphics.de _______________________________________________ Openflipper mailing list Openflipper@lists.rwth-aachen.de http://mailman.rwth-aachen.de/mailman/listinfo/openflipper
Joao Bettencourt ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.
Hi, if you installed it to /usr/local/Trolltech it should be enough to remove that directory. Afterwards remove that directory from your path variable. If you did that, use the package management to install the qt4 dev packages. Then clean your build directory and rebuild. If that still does not work, send me the CMakeCache.txt file which should be in your build directory. Regards, Jan Möbius On 02.03.2011 09:35, Joao Paulo Horta Bettencourt wrote:
Hi,
I have both Qt3 and Qt4 installed. I am using linux Ubuntu 9.10 but I did not used the package management system to install Qt4, instead I downloaded the source from Qt4 website and installed it manually.
My path variable is: ifisc@rizoma:~$ echo $PATH /home/ifisc/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/home/ifisc/bin/cmake-2.8.3-Linux-i386/bin:/home/ifisc/libs/m4-lib/bin:/usr/local/Trolltech/Qt-4.7.1/bin
ifisc@rizoma:~$
I've tried to uninstall the Qt4 that I had installed manually but I could not find the uninstall script. I wanted to use the package management system.
Thanks in advance,
Joao Bettencourt
Quoting Jan Möbius <moebius@cs.rwth-aachen.de>:
Hi,
I have some questions to fix your build problems:\
- Do you have multiple Qt installations? - What distribution or operating system do you use? - Did you install qt via the os package management (looks like a manual install) - What is your path variable set to?
Regards, Jan
On 25.02.2011 10:42, Joao Paulo Horta Bettencourt wrote:
Hi Jan,
I did not find it. Then I copyed it from /usr/local/Trolltech/Qt-4.7.1/include/QtGui to /usr/include/qt4/QtGui but the problem remained.
Should I install Qt-4.7.1 again?
Regards,
Joao
Quoting Jan Möbius <moebius@cs.rwth-aachen.de>:
Hi,
do you have this file: /usr/include/qt4/QtGui/QGraphicsItem
Regards, Jan
On 23.02.2011 15:26, Joao Paulo Horta Bettencourt wrote:
Hi Jan,
Thanks for the tip. I've checked and I am using Qt-4.7.1. I have also checked where is qt4 and it is on usr/lib/qt4 and usr/include/qt4.
Regards,
Joao
Quoting Jan Möbius <moebius@cs.rwth-aachen.de>:
Hi,
this problem may be caused by an too old Qt Version. You need at least version 4.6 to compile OpenFlipper.
Best Regards, Jan Möbius
On 21.02.2011 14:06, Joao Paulo Horta Bettencourt wrote: > Hi, > > I was trying to install Openflipper but when I run the make tool I > get a > undefined interface error. > > I send the output of the cmake configuration and also the error > from the > make tool below. This is a second run of the make tool, by the way. > > Thanks in advance, > > Joao Bettencourt > > ifisc@rizoma:~/bin/OpenFlipper-1.0/build$ cmake .. > -- FTGL was not found. Make sure FTGL_LIBRARY and > FTGL_INCLUDE_DIR are > set to the directories containing the include and lib files for > FTGL. If > you do not have the library you will not be able to use the Text > node. > -- FTGL was not found. Make sure FTGL_LIBRARY and > FTGL_INCLUDE_DIR are > set to the directories containing the include and lib files for > FTGL. If > you do not have the library you will not be able to use the Text > node. > -- FTGL was not found. Make sure FTGL_LIBRARY and > FTGL_INCLUDE_DIR are > set to the directories containing the include and lib files for > FTGL. If > you do not have the library you will not be able to use the Text > node. > MESSAGEFTGL not found! Disabled ftgl support! > -- Could NOT find Doxygen (missing: DOXYGEN_EXECUTABLE) > -- Could NOT find Doxygen (missing: DOXYGEN_EXECUTABLE) > > ************************************************************ > * ACG Buildsystem * > * * > * Package : OpenFlipper * > * Version : 1.0 * > ************************************************************ > > Plugin configure check results: > > TextureControl : Yes > TypeSphere : Yes > Backup : Yes > FileBVH : Yes > MeshRepair : Yes > FilePla : Yes > Move : Yes > SkeletonEditing : Yes > TypeLight : Yes > FileOBJ : Yes > FileLgt : Yes > FileSPH : Yes > Laplace : Yes > Info : Yes > FileOfv : Yes > Slice : Yes > Color : Yes > SimpleSmoother : Yes > TypeSkeleton : Yes > Subdivider : Yes > FilePLY : Yes > TypePlane : Yes > TypePolyMesh : Yes > TypeTriangleMesh : Yes > TypeBSplineCurve : Yes > FileSkeleton : Yes > Selection : Yes > IsotropicRemesher : Yes > VSI : Yes > FileOM : Yes > FileSTL : Yes > FileSKL : Yes > Topology : Yes > INI : Yes > SkeletalAnimation : Yes > TypeBSplineSurface : Yes > Print : Yes > Scripting : Yes > Smoother : Yes > ViewControl : Yes > Datacontrol : Yes > Decimater : Yes > FileOFF : Yes > MeanCurvature : Yes > FileScript : Yes > > ************************************************************ > > -- Configuring done > -- Generating done > -- Build files have been written to: > /home/ifisc/bin/OpenFlipper-1.0/build > ifisc@rizoma:~/bin/OpenFlipper-1.0/build$ make > [ 24%] Built target OpenMeshCore > [ 24%] Built target OpenMeshCoreStatic > [ 24%] Built target OpenMeshTools > [ 24%] Built target OpenMeshToolsStatic > [ 24%] Built target ACG > [ 24%] Built target translations_target_PluginLib > [ 24%] Generating moc_QtGraphicsButton.cpp > /home/ifisc/bin/OpenFlipper-1.0/OpenFlipper/widgets/glWidget/QtGraphicsButton.hh:67: > > > > Error: Undefined interface > make[2]: *** [OpenFlipper/PluginLib/moc_QtGraphicsButton.cpp] > Error 1 > make[1]: *** [OpenFlipper/PluginLib/CMakeFiles/PluginLib.dir/all] > Error 2 > make: *** [all] Error 2 > ifisc@rizoma:~/bin/OpenFlipper-1.0/build$ > > > > Joao Bettencourt > > > ---------------------------------------------------------------- > This message was sent using IMP, the Internet Messaging Program. > > > _______________________________________________ > Openflipper mailing list > Openflipper@lists.rwth-aachen.de > http://mailman.rwth-aachen.de/mailman/listinfo/openflipper
-- Dipl.Inform. Jan Möbius Department of Computer Science VIII Aachen University of Technology (RWTH) Ahornstrasse 55, 52074 Aachen, Germany
Phone ++49 (0)241 80-21817 Fax ++49 (0)241 80-22899 mailto:moebius@cs.rwth-aachen.de http://www.rwth-graphics.de _______________________________________________ Openflipper mailing list Openflipper@lists.rwth-aachen.de http://mailman.rwth-aachen.de/mailman/listinfo/openflipper
Joao Bettencourt
---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.
_______________________________________________ Openflipper mailing list Openflipper@lists.rwth-aachen.de http://mailman.rwth-aachen.de/mailman/listinfo/openflipper
-- Dipl.Inform. Jan Möbius Department of Computer Science VIII Aachen University of Technology (RWTH) Ahornstrasse 55, 52074 Aachen, Germany
Phone ++49 (0)241 80-21817 Fax ++49 (0)241 80-22899 mailto:moebius@cs.rwth-aachen.de http://www.rwth-graphics.de _______________________________________________ Openflipper mailing list Openflipper@lists.rwth-aachen.de http://mailman.rwth-aachen.de/mailman/listinfo/openflipper
Joao Bettencourt
---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.
_______________________________________________ Openflipper mailing list Openflipper@lists.rwth-aachen.de http://mailman.rwth-aachen.de/mailman/listinfo/openflipper
-- Dipl.Inform. Jan Möbius Department of Computer Science VIII Aachen University of Technology (RWTH) Ahornstrasse 55, 52074 Aachen, Germany
Phone ++49 (0)241 80-21817 Fax ++49 (0)241 80-22899 mailto:moebius@cs.rwth-aachen.de http://www.rwth-graphics.de _______________________________________________ Openflipper mailing list Openflipper@lists.rwth-aachen.de http://mailman.rwth-aachen.de/mailman/listinfo/openflipper
Joao Bettencourt
---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.
_______________________________________________ Openflipper mailing list Openflipper@lists.rwth-aachen.de http://mailman.rwth-aachen.de/mailman/listinfo/openflipper
-- Dipl.Inform. Jan Möbius Department of Computer Science VIII Aachen University of Technology (RWTH) Ahornstrasse 55, 52074 Aachen, Germany Phone ++49 (0)241 80-21817 Fax ++49 (0)241 80-22899 mailto:moebius@cs.rwth-aachen.de http://www.rwth-graphics.de
participants (2)
-
Jan Möbius -
Joao Paulo Horta Bettencourt